Plugging in Openhwy
Plug the power cable into your Openhwy device, then plug it into a power outlet.
Plug one end of the HDMI cable into your device, and the other end into an open HDMI port on your TV.
Plug the Wi-Fi antenna into an open USB port on your device.
Plug your keyboard’s USB receiver into any open USB port on your device. You may use any USB keyboard (it doesn’t have to be wireless). (require short Video Here)
Switch your TV to the correct HDMI input/source.
Move on to the next step when you see a screen that says “Connect me to the internet”.
Now that your device is connected to your screen, connect it to wifi!
Connecting to Wifi
If you’re connecting with an Ethernet cable, you can skip the WiFi setup. Simply plug in the ethernet cable – do not plug in the WiFi antenna or USB keyboard.
Connecting to Wi-Fi
Connect a USB keyboard to your Openhwy device. You may use any USB keyboard (it doesn’t have to be wireless).
Press the spacebar. You should now see a list of nearby Wi-Fi networks.
Use the keyboard’s trackpad or the arrow keys to select your Wi-Fi network.
Type in your Wi-Fi network’s password, then click “Connect”.
Once it’s connected, you should see a two-word setup phrase.
Next Steps: Link your device to your account
If this is the first device you’re linking to your account, log in to your account at dashboard.enplug.com from your laptop or desktop browser and follow the steps in “This Guide” -see below- to link this device to your account.
If this isn’t your first device, follow the steps described in this guide.
Link a Device and Add New Content
This guide assumes you have already connected your device to the internet.
If this is your first device, follow the steps below. This article will walk you through creating an empty display group, which you can populate with new content.
If you’re adding additional devices to an existing account and would like this device to mirror existing content, see this article instead.
Under the Displays dropdown, click “Add display group”.
Enter the setup phrase you see on your screen.
Enter a name for your display group. This will also be the name of the display (you can change this later).
Click “Save”. You will now have a new display group with one display.